ATTENTION: FadalVMCParts.com Has Been Retired
Click here to learn about the NXGEN Control at NXGENCNC.com

Reman / Repaired

Fadal CNC Boards

 
     
 
lefttop
 

 

Click On Image For Specific Board Page

1010
Axis Controller


Revisions: 1010-1
1010-4
1010-5
1010-6

Details & Prices

1020
Clock Card


Revisions: 1020-0F
1020-0G
1020-1B

Details & Prices

1030
Computer Interface


Revisions: 1030-0
1030-1B
1030-1C
1030-3E

Details & Prices

1040
Mill Interface


Revisions: 1040-1
1040-2
1040-3

Details & Prices

1060
Motherboard


Revisions: 1060-0
1060-1

Details & Prices

1090
Keyboard


Revisions: 1090-3
1090-3B
1090-4B
1090-5C
1090-6C

Details & Prices

1100
Power Distribution


Revisions: 1100-1
1100-2

Details & Prices

1400
Main CPU


Revisions: 1400-1
1400-2
1400-4
1400-5

Details & Prices

1420
Video Board


Revisions: 1420-1 (M)
1420-4 (M)
1400-6 (C)
1400-7 (C)

Details & Prices

1460
Memory Expansions


Revisions: 1460-1
1460-21 (128k)
1460-22 (384k)
1460-3 (16Mb)
1460-4A (8Mb)
1460-4B (8Mb)
1460-4C (16Mb)

Details & Prices

1550
Spindle Chiller Control


Revisions: 1550-2C
1550-2D
1550-3A
1550-3B

Details & Prices

21410
Byron Board


Revisions: 51410-0C

Details & Prices
   

Quality CNC88 and 32MP Replacement Boards

PCB's: New, Remanufactured and Repairs - Quality, Price and Service Like No Others!


Experience - Always Your Best Choice:
Having been involved in the original design, production of the CNC88 hardware and software, we truly understand these boards, down to the component level and the requirements for properly repairing and testing of all the boards we offer. With over 18 years of production testing and repairing the CNC boards, there is none better experienced or equipped! 

Before You Buy - Asking two simple questions can save you a lot of trouble.
1) How the board is tested for quality assurance?

One simple question can save you a lot of frustration, wasted time and money when servicing a problematic machine.
The common repair method today for others selling boards is to put a board in a machine and see if it fails. It can't be considered a "good board" just because the control doesn't fault.
2) Does it have the latest revisions?
Beware of old, used boards being simply pulled from a used machine and sold on-line.  There are issues of compatibility many don't realize.  Over time there have been both software and hardware modifications to the boards.  We are the only company that can ship boards with the latest revisions.  Does it matter?  Absolutely, why pay the same money and get less!

The fact is without the latest revisions and adequate testing, you might get some other unknown problems after installing an unknown, inferior board; wasting more of your time and money!

Our Testing That Is Unsurpassed!
We are the only ones who can properly test and repair the CNC88 boards!  It requires component level testing to verify that each and every component is performing to original specifications. 


In Circuit and Functional Test Boards


The Best And Only Way - In Circuit and Functional Testing:

The testing of electric circuits to determine and locate any of the following circuit conditions:
 (1) an open circuit.
 (2) a short circuit with another conductor in the same circuit.
 (3) a ground, which is a short circuit between a conductor and ground.
 (4) leakage (a high-resistance path across a portion of the circuit, to another circuit, or to ground).
 (5) a cross (a short circuit or leakage between conductors of different circuits).
 (6) a marginal or failed component(s).

 


The simple fact is that proper circuit testing for complex systems requires extensive automatic testing equipment to determine the failures defined above as well as many other quantities required to insure the board is working correctly.

PCB Replacement Options:
1- New or Remanufactured exchange available for immediate shipping, requires core exchange.
2- We'll repair your board, for about 1/2 the cost of exchange replacement!

All our boards come with a One Year Warranty!

Software Policy: We do not sell or distribute Fadal copyrighted software.  Boards such as the 1400 CPU board and the 1010 Axis controller board requires Fadal software, you must retain and use your original Eproms.

 

 


 

Request for Contact

Visit www.ITSCNC.com for prices and contact information.
If you need help, call us at 1-888-727-1887.

 

 


 

 

 

 

 

 
righttop