ATTENTION: FadalVMCParts.com Has Been Retired
Click here to learn about the NXGEN Control at NXGENCNC.com

Axis Amplifier

AMP-0006

 
     
 
lefttop
 

 

Glentek AMP-0006


Specs: DC Brush Amplifier
Wago Connector
XYZAB Axis

New AMP-0006 And Factory Rebuilds At Discount Prices

Our AMP-0006 Amplifiers Are Genuine OEM
We Sell Nothing Else!


Three Purchase Options:

- GTK NEW in factory sealed box
- GTK REMANUFACTURED, off the shelf exchange
- GTK REBUILD/REPAIR SERVICE

Specifications:
Part Number AMP-0006
20 AMP Continuous Output with 40 AMP Peak Output
Used with VMC 15 machines, for all axes (XYZAB) using the smaller amplifier footprint with WAGO connector.
For DC Brush Motors:
   MTR-0002
   MTR-0003
   MTR-0125
Interchangeable with AMP-0014

 

Total Engineering Support!

With us you're not just getting a "Part In A Box!"
Here's four key examples of the Total Support our customers receive:
Diagnoses - Direct help in determining if you really do need to replace the amplifier. When working with engineers that design the machine, we can help determine if there's other elements in the servo system that also need to be addressed before replacing an amplifier.

Documentation - We provide very simple and concise, step by step instructions on how to install and get your replacement amplifier in and running.  With our documentation we also include Preventative Maintenance tips to help avoid future failures.
Warranty
- Just like "the old days", we value our relationship with each and every customer.  We are driven by fairness and committed to your satisfaction. Click on the About Us page to learn about what guides us today.
Support - With the combination of our Fadal engineering knowledge and direct interaction with both Glentek and AMC engineers, you are getting the absolute best product support possible at installation and beyond.
The axis amplifiers are one of the most important aspects of the machine.  Why buy something from someone without the enginering experience and the manufacturer's direct support?

 


 

DC Servo Background:
In years perfecting Fadals DC servo system, we worked with just about every amplifier manufacture at one time or other and there's many good reasons why Glentek was chosen as the primary supplier (more below).

Today there are many people selling counterfeit amplifiers on the internet. 
Typically the counterfeits use a smaller generic brand amplifier and adapted it to fit a Glentek style L mounting plate . Of course they make all kinds of unsubstantiated claims about it being equal to or "better" than the Glentek amplifier.  One typical substitute uses the BR-1525 by Servo Dynamics Inc. and claim it has "more power".  When actually it has only a 15 amp continuous rating with a 25 amp peak output.
Fact is that's only 75% of the current needed for the MTR-0002, let alone the larger MTR-0010 (it needs 30 amps).
- The Glentek AMP-0006 provides 20 amp continuous duty with a 40 amp peak output.
- The Glentek AMP-0021 provides 30 amp continuous duty with a 60 amp peak output.

Trust The Engineering Facts - with amplifiers it's all about having the proper current output for each specific motor!


Here's Five Good Reasons Why It's Important To Buy Only OEM Amplifiers:

  • Performance - the basic function of the AMP-0006 amplifier operates as a Velocity Closed Loop system; that regulates the speed and response of the motor rotation.  The custom settings for the internal velocity feedback and speed command relationship of the amplifiers were carefully tuned for maximum performance years ago during our initial development. Dynamic performance requires matched (exactly) components not imitations. Sure the motor might rotate but that doesn't mean the contouring of the machine is accurate.
     

  • Current Output - amplifiers are not equal in current (power) output ratings.  The factory outputs are matched for specific motor windings.  Too little and the motor loses torque (thrust). Too much; motors windings will over heat, destroying the insulation and/or windings. The basic fact is that a motor can only take so much current; more current doesn't mean more power. To much current will burn out the motor.
     

  • Internal Circuit Breakers - AMP-0006 amplifiers have internal circuit breakers, just like a home electrical system.  These designs protect both the amplifier and the motor by automatically "folding back" the current output to it's continuous rating or shutting off all power (fault) output.  Without the correct design; using both High Speed and Low Speed Circuit Breakers, too much current will over heat, melt the insulation and "fry" the motor, permanently damaging it beyond repair.
     

  • UL-CE-CSA Electrical Ratings - commonly, substitute or "imitation" amplifiers have not gone through the process of having the amplifier design approved by the rigorous testing for safety and RF standards.  Qualified components must be used In order to maintain these ratings for the machine and not impact it's overall Electrical Code approval of your machine. Let alone the resale value.
     

  • New or Used? - beware, some components are being sold as "new" when actually they are just cleaned-up and sold as "new".  The manufactures serial number is the only way to tell if the unit is new and has all the latest design revisions.

Questions?  Not sure what parts you need?
Call us at 888-727-1887 to speak with an engineer for help identifying the problem.

More InformationClick Here To View All Available Amplifiers

 

 


 

Request for Contact

Visit www.ITSCNC.com for prices and contact information.
If you need help, call us at 1-888-727-1887.

 

 


 

 

 

 

 

 
righttop