KEEP YOUR IRON - UPGRADE your Fadal Control
Click here to learn about the NXGEN Control at

Axis Motors




Glentek GM-4050FS

Specs: DC Brush Motor
AB Axis

New MTR-0125 And Factory Rebuilds At Discount Prices


Glentek Motors for Fadal Machines

Our Motors Are Genuine OEM - Not "Substitutions"

Three Purchase Options:
- GTK NEW in factory sealed box
- GTK REMANUFACTURED, off the shelf exchange

Part Number MTR-0125
DC Motor for TR65 (B-Axis), Dual VH65 and many larger rotary tables.  Same as the MTR-0002 except with sealed end cap.
For DC Brush Amplifiers:
   AMP-0021 *
* Reduce Current Limit Pot. to avoid excessive amperage going to motor if present on amplifier (Turn CCW to reduce)

Here's Five Good Reasons Why It's Important To Buy OEM Motors:

  • New or Used? - beware, some motors are being sold as "new" when actually they are just cleaned-up, painted and passed off as new. 
    The manufactures serial number is the only way to tell if the unit is new and has all the latest design revisions. The date code is imbedded in the serial number coding and it's easy to tell if your getting the "Real McCoy".

  • Mechanicals - all motors are not the same!.  They may look the same; "cast the same shadow" but that doesn't mean they are the same. You don't know what you getting until to disassemble the motor and see how it was designed. 
    Experience has taught that lesson. Twice, years ago at Fadal we tried numerous motors and they all failed long term tests.  It wasn't until we disassemble completely did we find out how lousy some "Name Brand" motors were built. 
    Servo Motors aren't your ordinary washing machine motors. They require quality and precision in all aspects.
    We plan on adding more specific information about motors soon for both new and repaired motors.

  • Input Power - The factory amplifier outputs are matched for specific motor windings.  Too little current and the motor doesn't produce enough torque (thrust).  Too much current motors windings will over heat, "melting" the insulation and/or windings.

  • Feedback - Fadal motors have carefully designed velocity feedback. This is a critical design aspect for smooth contouring. Imperfections in the velocity feedback causes a "ripple" effect in the smooth operation, which translates directly in the finish.
    Many other design aspects effect the feedback performance, here's just a few:
      1) DC Tachometer designs without a silver commutator produce inferior reference voltage.
      2) AC motors, the type of encoder will effect ripple; actual line count(quality) or interpolated(cheaper).
      3) Feedback coupling - only a constant velocity coupler can eliminate alignment errors.

  • UL-CE-CSA Electrical Ratings - to commonly, substitute/imitation parts have not gone through the expensive process of having the motor approved by the rigorous testing for safety and RF standards.  Qualified replacements must be used In order to maintain these ratings and not impact the Electrical Code approval of the machine.

Questions?  Not sure what motor you need?

For Best Pricing Options (new, reman or repair):

  Live Quote - Call 406-600-0624

  Online Quote - Simply fill out the form below.

More InformationClick Here To View All Available Motors




Request for Contact

If you need help, call us at 406-600-0624.